| HIGH PRESSURE ADOPTORS SINGLE LOCK ADOPTOR |
 |
High-pressure adoptors. Releases pressure upto 90 psig. To be fitted on to SC. type cylinder to convert them into battery of cylinders for manifold installation. Both type of Adoptors as on this page are available in 22mm and 25.6mm inlet size and 3/8 or MECV outlet size. |
| |
| MULTI LOCK BEARING ADOPTOR |
|
 |
These die-cast multi-point adoptors enable the connection of the cylinders fitted with self-closing valves to a high pressure system through a standard M.E.C.V. thread with unreduced pressure and a high flow rate. The adoptors are fitted with a non return valve to ensure that there is no return flow of LPG whilst cylinders are being disconnected. The salient features of these adoptors is the multi-point locking mechanism which combined with a face seal ensures that the adoptor will not leak even if it is loaded off axis. The quick disconnecting arrangement coupled with a safety interlock ensures that the device can only be disconnected after turning off the gas flow. Both adopters featured above are available in 22 mm and 25.6 mm seats, and 3/8" or MECV outlet size.
Makes available : Vanaz & Kosan |
| |
| HIGH PRESSURE REGULATORS |
|
 |
O-20 WITH GAUGE
Used for small comercial installations or installed on manifolds/piping
Installed on any High Pressure Adoptor or on pipe or on high-pressure valves to obtain variable outlet pressure to use appliances with high-pressure burners.
These regulators can be used for first or second stage pressure regulators and are stable over the entire range of delivery pressure. Adjustable pressure 0-20 psig. |
| |
| DIRECT CYLINDER MOUNTED INDUSTRIAL GAS PRESSURE REGULATORS |
 |
- Inlet pressure 200 bar maximum
- Delivery pressure adjustable 1 to 10 bar
- Fluid media, non corrosive gases
- Temperature range -40ºc to +70ºc
- Body ports 1/4" / 1/2" npt female
- Pressure gauges 50 mm diameter
- Wetted area parts ultrasonically cleaned corrosion resistance
- Make : Weldcut, Arth or Esab with ss diaphragm
|
| |
| KOSAN REGULATOR |
|
 |
For direct cylinder mounting with 3/8"outlet for variable pressure release from 0 to 2 Bar. |
| |
